White flower paste(gumpaste) Edible petal dusts: racing green, magenta 28 and 18 gauge white florist wires. Florist tape half wide Flat paintbrushes Mak up sponge Cellpin tool Silicone veiners for...

Dye a piece of apricot-sized gumpaste with green dye. Make 3 balls of about 5mm in diameter. 3 wires of thickness 18 are taken and a hook is made as small as possible at the end of each of the...

Prepare florist wire of thickness 28 and cut into 4 equal pieces. Form 3 rubber paste balls of 2cm, 1.5 cm and 1 cm for leaves. Form 3 balls of green rubber paste of 1 cm diameter to model...

Prepare florist wire of thickness 28 and cut into 4 equal pieces. Form 3 rubber paste balls of 2cm, 1.5 cm and 1 cm for leaves. Form 3 balls of green rubber paste of 1 cm diameter to model...

Cut 28 gauge wires into 4 pieces. Make 26 balls size 2cm diameter and 35 balls size 1.5 cm. Model peals as seen in the video

With green dye paint the leaves on both sides, insisting on the upper face, since that must have a more intense color. Also paint the sepals with green. With magenta paint a little the upper edges...

Prepare a mixture of isopropyl alcohol and food glaze in proportion of 75%-25%. Prepare a container with high walls and sufficient width to be able to introduce into the hand. Pass the leaves and...

With florist tape assemble the parts of the pistil and cover the stem in totality. Then assemble the narrow petals, one by one around the pistil. Assemble all petals at the same height. Once the...

On the cap of the magenta dye put some dye and a few drops of isopropyl alcohol. With a fine brush paint small touches on the edges of some petals – do not exaggerate and do not paint many petals....

With florist tape assemble the leaves together. Cover a few centimeters with rubber paste, forming a short stem for the leaves.

With florist tape assemble the sepals under the petals, very carefully. With green rubber paste cover about 6 cm of the stem, starting above, under the sepals. With your fingers smooth the paste on...