Thank you both! KariAnn – I started with a 12×18 cake and cut in to 1/4 sheet bars. I stacked 3 of them for the larger part of the firetruck and the other piece I cut in to thirds to make the front of the truck and carved accordingly. I used RKT for the part under the hose. The cake is on a foam board covered in Reyonlds freezer paper. Under that board there are 2 or 3 pieces of foam board that were glued together to make the truck/tires about 1/2" above the final cake board. If you’re making your own fondant, make sure you make the red ahead of time so it has time to darken. As it sits it will darken. Also use a sturdy cake recipe and it will be much easier to stack, carve and cover. Hope this helps and good luck! =)
Tiff - MA www.facebook.com/sweetbeecakery
