Thank you! The legs are pvc pipe screwed into an mdf board and the top of the legs screw into another 6" mdf circle. Then we screwed a pvc spine to the center of the 6" board and used a “T” piece at the top of the spine to attach the arms. You can see on the side picture, there was a little fondant cracking where his arm came out in between the cakes and I probably would have freaked if it were for a client!! For the hands, we cut a 1" slice of thick pvc pipe, drilled a hole through the center, stuck fondant into the hole at the end of the pipe arm and used a skewer and royal frosting to attach the hand. On the hand that’s holding the piece of cake, I attached his hand to the arm the same way but hot glued the board to his hand, I didn’t trust the weight of that slice of cake! Hope that makes sense! :)
I’ve been saved, I’ve been changed, I have been set free! www.facebook.com/sbcakedesign
